A&D AD-4408C Bedienerhandbuch PDF herunterladen (Seite 56)

AD-4408C Weighing Indicator Page 54

10.3. Initialization Mode

The initialization restores the contents of the battery backup RAM and EEPROM to the

default values.

The three types of initialization are available as shown below.

Initialization mode Display Description

RAM initialization

ini ra

Initializes the contents of the battery

backup RAM only.

As the zero and tare values are stored in

the battery backup RAM, they will be

restored to 0.

General functions

initialization

inifnc

Initializes the contents of the general

functions stored in the battery backup

RAM and EEPROM.

All data

initialization

iniall

Initializes all the contents in the battery

backup RAM and EEPROM.

The calibration-related data is also initialized.

So, calibration is required before using

the indicator again.

10.3.1. RAM initialization / General functions initialization

Step 1 While holding down the ENTER key, press the F key.

fnc is displayed to indicate that the indicator will enter the general function

mode.

To return to the weighing mode, press the ESC key.

Step 2 While holding down the ZERO key, press the ENTER key.

1Chc is displayed to indicate that the indicator will enter the check mode.

Step 3 Press the ∧ or ∨ key to select the initialization mode ( ini ) and press the

ENTER key.

Step 4 Press the ∧ or ∨ key to select the item to be initialized and press the ENTER

key.

Step 5 All the status LEDs blink to prompt a confirmation. To initialize, hold down the

ENTER key for three seconds or more.

After initialization, the indicator is reset and all the display segments are ON.

And the indicator enters the weighing mode.

To exit from this mode without performing initialization, press the ESC key.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

A&D AD-4408C Bedienerhandbuch Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern A&D AD-4408C