A&D AD-8922A Bedienerhandbuch PDF herunterladen (Seite 34)

１３ ANALOG OUTPUT (AD-8922A-06)

Converts the specified digits of the weighing data received from the weighing instrument to voltage and

outputs. The output voltage can be selected from "0 to 1 V" and "0.2 to 1 V".

Note: When the AD-8922A-06 is installed, the pin assignment (DIN 8-pin), of the RS-232C serial

interface, to connect an external device, will be changed.

１３-１ Analog Output Specifications

Accessories

DIN connector (Plug) 1 pc.

Screwdriver 1 pc.

Instruction manual 1 copy

Panel view

Analog output

Output impedance 100 Ω or less

Linearity 0.3% or less

Output range 0 V-1 V (With the slide switch set to “0V～“)

0.2 V-1 V (With the slide switch set to “0.2V～“)

RS-232C

Transmission system : EIA RS-232C

Transmission form : Asynchronous, bi-directional, half duplex

Data format : Baud rate : 600, 1200, 2400, 4800, 9600, 19200 bps

Data bits : 7 bits or 8 bits

Parity bit : EVEN, ODD (Data bits 7 bits)

NONE (Data bits 8 bits)

Stop bits : 1 bit or 2 bits

Code : ASCII

Terminator : <CR> or <CR><LF>

BALANCE

/SCALE

ANALOG OUT

0V /0.2V ZERO SPAN

AD8922A

OP-06

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

A&D AD-8922A Bedienerhandbuch Seite 34