A&D GH Series Bedienerhandbuch PDF herunterladen (Seite 35)

8.2. Details of the Function Table

English

GB 35

Class Item Parameter Summaries

bASFnc Cond 0 Fast response, Sensitive value Common data of “Response

Environment, Condition • 1 adjustment”.

Display 2 Slow Response and stable value

St-b 0 Stable when within ±1 digit The stability indicator lights when

Stability band width • 1 the display fluctuation is within

2 Stable when within ±3 digit the range per second

trc 0 OFF The function to keep zero display

Zero tracking • 1 ON by tracking zero-drift.

SPd • 0 Normal, 5 times/second The period to refresh the display.

Display update rate 1 Fast, 10 times/second

Pnt • 0 Point (.) The form of decimal point.

Decimal point 1 Comma (,)

P-on • 0 OFF Connecting adaptor, the display

Automatic start 1 ON turns on wuthout key operation.

dout • 0 Key mode Data is output or stored with

Data output PRINT key and stability indicator.

1 Auto-print mode A Data is output or stored when the

Prt (Standard value is zero) display value is stable and meets

Data output mode Auto print mode B the conditions of AP-P, AP-b

2 (Standard value is last and standard value.

stable value)

In case of dAtA 0,

3 Stream mode/ Data is output continuously.

Interval memory mode In case of dAtA 1,

Data memory function is used.

AP-P • 0 Plus polarity Display value * Standard value

Auto-print polarity 1 Minus polarity Standard value > Display value

for mode A or B 2 Both polarities (Absolute value) Display value * Standard value or

Standard value > Display value

AP-b 0 10 digit Difference between standard

Auto-print difference • 1 100 digit value and display value.

for mode A or B 2 1000 digit

dAtA • 0 Not used Relation: Prt, int, d-no

Data memory function 1 Use

• 0 Every Measurment

1 Every 2 seconds Interval time is selected on

int 2 Every 5 seconds Prt 3

, dAtA 1.

Interval time for 3 Every 10 seconds

Data memory function 4 Every 30 seconds

5 Every 1 minute

6 Every 2 minutes

7 Every 5 minutes

8 Every 10 minutes

•: factory setting.

*: “Digit” is the unit of minimum display.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

A&D GH Series Bedienerhandbuch Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messen, Testen & Steuern A&D GH Series