A&D OP08 Bedienerhandbuch PDF herunterladen (Seite 3)

1. Introduction

This manual describes the operation to acquire data from a balance via an OP-08 Ethernet

interface by using data acquisition software “WinCT-Plus”.

Features of WinCT-Plus

-Enables data acquisition from multiple weighing instruments through Ethernet with a single

computer.

-Weighing instruments up to 100 units can be connected. However, connection may be restricted

depending on the computer’s performance or the frequency of data acquisition.

-Weighing instruments can be controlled by sending commands from the computer.

-The software can collect data by pressing the [PRINT] key on the weighing instrument.

-Recorded data can be opened easily in an Excel file. (Not applicable with Windows Vista)

(Microsoft Excel should be installed in advance.)

Please see the separate document "Manual(for the AD8526)" if the AD8526(Ethernet Converter) is

used.

1) Necessary systems

①Computer OS Microsoft Windows 2000 onwards

CPU CPU equivalent to Pentium class or above recommended

RAM At least 32MB memory recommended

Hard Disk Space of at least 50MB required

CRT Resolution of at least of 800×600 recommended

CD-ROM drive

LAN port

②Balance equipped with an OP-08

③Ethernet hub

＊

④LAN cable（straight cable

＊

）

Note: If Ethernet hub is not used, cross cables should be used for LAN cabling.

2) Folder structure of WinCT-Plus

English

Setup Tools

DeviceInstaller ------ Software for various setting of OP-08

Microsoft .NET Frameworks Version1.1

redirector ------------

Software for establishing a Virtual COM port (See chapter 7-1)

WinCT-Plus ---------------------- Data acquisition software

Manual

(for the AD8526).PDF

Manual (for the OP-08).PDF

Readme.txt

1 2 3 4 5 6 7 8 ... 35 36

Keine Kommentare

A&D OP08 Bedienerhandbuch Seite 3